2017 Honda CBR650F
Honda’s faired CBR650F four-cylinder middleweight gains Showa Dual Bending Valve front forks and revised Nissin brake calipers for 2017 but once again only the LAMS version of the machine will be available in Australia. Stylish bodywork highlights the engine and pumps up the Super Sport style.
A four-cylinder middleweight provides accessible and enjoyable engine performance tied to minimal mass and, for many riders, is a great place from which to begin motorcycling.
Affordable to both purchase and run, the CBR650F are small on costs but big on excitement.
On its introduction in 2014 alongside the naked CB650F, it combined day-to-day practicality and ease of use with a strong dose of CBR-specification sporting intent and style.
For 2017, the new CBR650F turns it up a notch on every level – it’s still an easy machine to live with, but looks sharper, handles better, makes more power and delivers an amplified note that complements the sharper visual edge.
Sadataka Okabe – Large Project Leader
“The CBR650F has found its place with owners who want sports style and performance without the compromise and expense. Our aim with the new machine was to add extra rider excitement and enjoyment while sacrificing none of the usability. The engine still makes great torque from low rpm. The latest SDBV fork enhances the chassis and the styling is much more aggressive – more CBR and also something quite unique, with the engine really on show.”
More peak power from revised intake funnels and a new free-breathing exhaust gives the CBR650F a satisfying rush to its 11,000rpm redline, while shorter gear ratios ensure harder acceleration through the mid-range.
Along with the power upgrade, a new growl emanates from down low and grows to a fast-spinning howl as revs rise.
The chassis too has been honed with a Showa Dual Bending Valve front fork and revised Nissin front brake calipers. Sharply angled, the CBR650F’s new fairing highlights the engine and accentuates the aggressive, ready-for-action stance, with an overall look and feel redolent of the 2017 CBR1000RR Fireblade. The headlight and taillight are now LED.
2017 Honda CBR650F Engine
Shorter air intake funnels feed four 32mm throttle bores from a down-flow airbox (which itself draws through larger intake ducts) and in turn the right side-swept 4-1 exhaust now employs a dual-pass internal structure (rather than triple-pass) in the muffler, reducing back pressure. It also features a larger final exit aperture.
With shorter gear ratios from second through to fifth, the new CBR650F gets away from the line faster than the previous model while an extra layer of aural satisfaction, a throaty induction growl at low-to-mid rpm swaps over to an addictive high-rpm howl reminding the CBR650F rider of Honda’s four-cylinder racing pedigree.
The 649cc engine uses a compact internal architecture, stacked six-speed gearbox and starter/clutch layout with the cylinders canted forward 30°.
The DOHC 16-valve cylinder head employs direct cam actuation; bore and stroke is set at 67mm x 46mm with compression ratio of 11.4:1.
Asymmetric piston skirts minimise bore contact and reduce friction. Ferrous spines on the outer surface of the cylinder sleeves reduce oil consumption (and friction) with improved heat transfer and a silent SV cam chain reduces frictional losses by using a Vanadium coating on its pins.
Internal water channeling from cylinder head to cylinders does away with most of the exterior hoses.
Fuel consumption of 21km/l (WMTC mode) gives a range of over 350km from the 17.3L fuel tank. The CBR650F engine is EURO 4 compliant.
2017 Honda CBR650F Chassis
The CBR650F’s steel diamond frame uses twin 64mm x 30mm elliptical spars with a rigidity balance specifically tuned (stiffer around the headstock and more ‘flexible’ in the spar sections) to deliver balanced handling characteristics with high levels of rider feedback.
Rake is set at 25.5° with trail of 101mm and wheelbase of 1,450mm. Kerb weight is 213kg.
A brand new 41mm Showa Dual Bending Valve (SDBV) front fork improves ride comfort and handling, delivering proportional rebound damping with firmer compression damping as the 120mm stroke is used up.
Octagonal fork caps are finished in attractive Alumite. Adjustable for 7-stage spring preload, the single-tube monoshock operates directly on the curved gravity die-cast aluminium swingarm.
Cast aluminium six-spoke wheels wear 120/70-17 and 180/55-17 front and rear radial tyres and feature L shaped air valves for easier maintenance.
Revised two-piston Nissin front calipers work 320mm wavy discs, with a single-piston rear/240mm disc. Two-channel ABS is fitted as standard.
The new front fairing not only adds Super Sport style, but also channels airflow from the high pressure area at the front to the interior airbox intake duct.
It also shows off the engine to the maximum – it was designed to be on display after all – and highlights the aggressive Mass Forward stance of the machine.
Minimal sidepanels sharpen up the rear and the clear-lensed LED taillight complements the crisp LED headlight. The seat’s narrow middle profile helps ground reach and it sits on rubber mounts that are carefully shaped (with specific hardness) to minimise vibration. Seat height is 810mm.
The dash comprises twin large digital screens. On the left are the rev-counter and speedometer; on the right are a fuel gauge, clock, odometer and the warning lights. Both sides are lit by a white back light. The key is a compact ‘wave’ design.
Underscored with a blacked-out frame, swingarm and wheels (plus bronzed engine covers) the CBR650F will be available in the following colour options: Millenium Red, Pearl Metalloid White, Matt Gunpowder Black Metallic, Sword Silver Metallic.
2017 Honda CBR650F Specifications
Engine – 4-cylinder, liquid-cooled, 4-stroke, DOHC, 4-valves, 649cc, 67 x 46mm bore x stroke, 11.4:1 compression ratio
Carburation – PGM-FI electronic fuel injection
Fuel Tank Capacity – 17.3L
Clutch Type – Wet, multiplate disc
Transmission Type – 6-speed
Final Drive – Chain
Frame – Steel diamond
Dimensions (LxWxH) – 2110 x 755 x 1145mm
Wheelbase – 1450mm
Caster Angle – 25.5
Trail – 101mm
Seat Height – 810mm
Ground Clearance – 150mm
Kerb Weight – 213kg
Front Suspension – 41mm SDBV telescopic fork
Rear Suspension – Monoshock damper with adjustable preload
Wheels – Hollow section 6-spoke cast aluminium, 120/70ZR17 M/C (58W), 180/55ZR17 M/C (73W)
Brakes – ABS, 2 channel, dual 320mm front discs, 240mm rear disc
Instruments – Digital multifunction
